TMP 241 Dual-Output Hydraulic Pump Drive
The TMP 241 is a compact dual-output hydraulic pump drive for running two hydraulic pumps from one engine or electric motor. It shares the same 395 kW reference motor rating as the TMP 240, with two outputs rated at 197 kW per output, and is available with ratio options from 0.493:1 to 1.500:1.
Technical Product Data
At a glance
Outputs
2 outputs
Motor Power
395 kW
Power/Output
197 kW per output
Ratio Range
0.493:1 to 1.500:1
Oil Quantity
1.2-2.5 L
Compact dual-output pump drive for two hydraulic circuits
The TMP 241 is built for applications where two independent hydraulic pump circuits need to be driven from a single input. It gives machine builders and maintenance teams a structured way to split mechanical power without creating unnecessary driveline complexity.
Its dual-output arrangement makes it suitable for compact hydraulic systems where installation space, output alignment, and reliable pump speed are important. The TMP 241 uses a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, and ground gears to support reliable operation in demanding environments.
Compared with larger dual-output models, the TMP 241 is a useful option where the application requires the same general power class as the TMP 240 but with a different installation layout or dimensional envelope. Final selection should always be checked against the datasheet drawing and pump mounting requirements.
Key benefits
Dual pump output from one drive
Run two hydraulic pumps from one engine or motor, reducing the need for separate drive arrangements.
Ratio flexibility
The TMP 241 offers ratios from 0.493:1 to 1.500:1, giving engineers options for matching pump speed to hydraulic demand.
Lower oil quantity than TMP 240
The TMP 241 datasheet shows oil quantities from 1.2 L to 2.5 L, depending on ratio. This may be relevant where installation space or service volume matters.
Designed for technical specification
The product sheet includes dimensional drawings, output position details, oil fill/breather/drain points, and oil level stick location, helping buyers check fit before ordering.
Standard equipment
- Cast iron housing
- Case hardened shafts
- Ball bearings
- Viton oil seals
- Ground gears
- Same rotation for each output
- Output rotation opposite to input rotation
- Same ratio on all outputs
Technical overview
| Specification | TMP 241 |
|---|---|
| Configuration | Dual-output pump drive |
| Reference motor power | 395 kW |
| Power per output | 197 kW |
| Maximum input RPM at 1:1 ratio | 3200 rpm |
| Ratio range | 0.493:1 to 1.500:1 |
| Maximum input torque range | 1000-1600 Nm |
| Maximum output torque pad range | 390-750 Nm |
| Oil quantity range | 1.2-2.5 L |
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Not sure whether the TMP 241 is the correct dual-output model?
Send us your engine details, pump models, mounting requirements, and required pump speed. We can help compare the TMP 241 against the TMP 240, TMP 250, and TMP 255.
