TMP 460 Quad-Output Hydraulic Pump Drive
The TMP 460 is a quad-output hydraulic pump drive for severe-duty applications requiring up to four hydraulic pump outputs from one engine or electric motor. With a 700 kW motor reference, 350 kW per output, cast iron housing, ground gears, Viton oil seals, and lubricated hubs, it is designed for high-demand hydraulic power distribution.
Technical Product Data
At a glance
Outputs
4 outputs
Motor Power
700 kW
Power/Output
350 kW per output
Ratio Range
0.694:1 to 1.000:1
Oil Quantity
3.1-4.5 L
Quad-output pump drive for heavy-duty hydraulic power distribution
The TMP 460 is the highest-output pump drive in the TMP range, designed for machinery that needs to distribute mechanical power across four hydraulic pump outputs from one input source.
It is suited to heavy-duty hydraulic applications where several high-demand circuits need to be powered from a single diesel engine or electric motor. Typical use cases include heavy mobile machinery, marine hydraulic systems, industrial power packs, specialist equipment, and machinery with multiple simultaneous hydraulic functions.
Instead of using separate drive arrangements for each pump, the TMP 460 provides a single, integrated quad-output transmission unit. This helps reduce driveline complexity while giving engineers a defined, datasheet-backed layout for pump mounting, ratio selection, oil servicing, and installation checks.
The standard setup includes a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, ground gears, same rotation at each output, output rotation opposite to input rotation, same ratio on all outputs, and lubricated hubs.
Key benefits
Four pump outputs from one input
The TMP 460 allows up to four hydraulic pumps to be driven from a single engine or motor. This makes it suitable for complex machinery where multiple hydraulic circuits must be powered from one prime mover.
Highest-capacity TMP pump drive
With a 700 kW motor reference and 350 kW per output, the TMP 460 is positioned for the most demanding TMP pump drive applications.
Built for severe-duty power transmission
The cast iron housing, case hardened shafts, ball bearings, Viton oil seals, and ground gears are designed to support reliable operation where vibration, heat, and load variation can place stress on the transmission system.
Lubricated hubs as standard
Lubricated hubs are included as part of the TMP 460 standard setup, supporting durability and serviceability in heavy-duty hydraulic applications.
Datasheet-supported installation checks
The TMP 460 datasheet includes dimensional drawings, output pad information, oil fill/breather/drain locations, oil level stick position, and service notes. This gives engineers the technical information needed to check the installation envelope before ordering.
Standard equipment
- Cast iron housing
- Case hardened shafts
- Ball bearings
- Viton oil seals
- Same rotation for each output
- Output rotation opposite to input rotation
- Ground gears
- Same ratio on all outputs
- Lubricated hubs
Technical overview
| Specification | TMP 460 |
|---|---|
| Configuration | Quad-output pump drive |
| Reference motor power | 700 kW |
| Power per output | 350 kW |
| Ratio options | 0.694:1, 0.794:1, 0.877:1, 1.000:1 |
| Maximum input torque range | 2900-3420 Nm |
| Maximum output torque pad range | 1187-1450 Nm |
| Maximum input RPM range | 2056-2430 rpm |
| Maximum output RPM range | 2430-2962 rpm |
| Oil quantity range | 3.1-4.5 L |
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Need to confirm whether the TMP 460 is the correct quad-output drive?
The TMP 460 is a high-capacity unit, so ratio selection, pump pairing, torque demand, and installation layout should be checked carefully before ordering.
Send us your engine speed, pump models, required output speeds, torque requirements, and available installation space. We can help confirm whether the TMP 460 is the correct pump drive for your application.
