TMP 340 Triple-Output Hydraulic Pump Drive
The TMP 340 is a triple-output hydraulic pump drive designed to run three hydraulic pump circuits from one engine or electric motor. It is rated around a 395 kW motor reference, with 197 kW per output, and ratio options from 0.493:1 to 1.500:1. It is built with a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, and ground gears.
Technical Product Data
At a glance
Outputs
3 outputs
Motor Power
395 kW
Power/Output
197 kW per output
Ratio Range
0.493:1 to 1.500:1
Oil Quantity
1.8-3 L
Triple-output pump drive for three hydraulic circuits
The TMP 340 is designed for machines that need to distribute mechanical power across three hydraulic pump outputs from a single input. This makes it useful for mobile machinery, agricultural systems, marine hydraulic installations, and industrial power packs where multiple hydraulic functions need to operate from one engine or electric motor.
Rather than adding separate drive arrangements for each pump, the TMP 340 provides a compact triple-output transmission layout. This helps simplify the driveline, reduce installation complexity, and keep pump speed selection within a defined datasheet-backed range.
The unit uses a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, and ground gears. The outputs rotate in the same direction as each other, while output rotation is opposite to the input rotation. The TMP 340 datasheet also confirms that the same ratio applies across all outputs.
Key benefits
Three hydraulic pump outputs from one input
The TMP 340 allows one engine or electric motor to drive three hydraulic pump circuits, helping support more complex hydraulic systems without requiring multiple prime movers.
Compact power distribution for multi-function machinery
For equipment with several hydraulic functions, the TMP 340 gives engineers a structured way to distribute power while keeping the pump drive layout controlled and serviceable.
Wide ratio range
The TMP 340 is available with ratios from 0.493:1 to 1.500:1, giving flexibility when matching pump speed to hydraulic demand.
Datasheet-backed technical selection
The product sheet includes torque, RPM, oil quantity, and dimensional drawing information, allowing the buyer to check fit and performance before ordering.
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Standard equipment
- Cast iron housing
- Case hardened shafts
- Ball bearings
- Viton oil seals
- Ground gears
- Same rotation for each output
- Output rotation opposite to input rotation
- Same ratio on all outputs
Technical overview
| Specification | TMP 340 |
|---|---|
| Configuration | Triple-output pump drive |
| Reference motor power | 395 kW |
| Power per output | 197 kW |
| Maximum input RPM at 1:1 ratio | 3200 rpm |
| Ratio range | 0.493:1 to 1.500:1 |
| Maximum input torque range | 1000-1600 Nm |
| Maximum output torque pad range | 390-750 Nm |
| Oil quantity range | 1.8-3 L |
Need to check whether the TMP 340 is the correct triple-output drive?
Send us your engine speed, pump models, required output speed, mounting arrangement, and duty cycle. We can help check whether the TMP 340 is the right fit before you order.
