TMP 250 Dual-Output Hydraulic Pump Drive
The TMP 250 is a heavy-duty dual-output hydraulic pump drive for higher-power applications requiring two hydraulic pump outputs from one input. It is rated around a 530 kW motor reference, with 265 kW per output, and includes lubricated hubs as part of its standard setup.
Technical Product Data
At a glance
Outputs
2 outputs
Motor Power
530 kW
Power/Output
265 kW per output
Ratio Range
0.655:1 to 1.525:1
Oil Quantity
5.2-6 L
Heavy-duty dual-output pump drive for higher-power hydraulic systems
The TMP 250 is designed for machinery that requires a stronger dual-output pump drive than the smaller TMP 240 and TMP 241 models. With two pump outputs, a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, ground gears, and lubricated hubs, it is suited to demanding hydraulic applications where torque transfer and long-term reliability matter.
The TMP 250 helps engineers distribute power from one engine or electric motor into two pump circuits while keeping the installation controlled and serviceable. It is a strong option for heavy mobile machinery, marine hydraulic systems, industrial power packs, and agricultural equipment with higher hydraulic demand.
The datasheet includes multiple ratios from 0.655:1 to 1.525:1, allowing the output speed to be selected according to pump and application requirements.
Key benefits
Higher power dual-output configuration
The TMP 250 is designed for applications requiring two pump outputs with higher power capacity than the smaller dual-output units.
Lubricated hubs as standard
The TMP 250 includes lubricated hubs in the standard setup, supporting durability in demanding duty cycles.
Multiple ratio options
Ratios from 0.655:1 to 1.525:1 allow engineers to match pump speed to application demand.
Datasheet-supported specification
The TMP 250 product sheet includes technical data, ratio tables, dimensional drawings, output pad information, and weight information. The datasheet gives a listed weight of 162 kg.
Standard equipment
- Cast iron housing
- Case hardened shafts
- Ball bearings
- Viton oil seals
- Ground gears
- Same rotation for each output
- Output rotation opposite to input rotation
- Same ratio on all outputs
- Lubricated hubs
Technical overview
| Specification | TMP 250 |
|---|---|
| Configuration | Dual-output pump drive |
| Reference motor power | 530 kW |
| Power per output | 265 kW |
| Maximum input RPM at 1:1 ratio | 2600 rpm |
| Ratio range | 0.655:1 to 1.525:1 |
| Maximum input torque range | 1551-2370 Nm |
| Maximum output torque pad range | 776-1183 Nm |
| Oil quantity range | 5.2-6 L |
| Weight | 162 kg |
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Need to confirm pump speed, torque, or output configuration?
The TMP 250 is a higher-capacity dual-output unit, so ratio selection and pump compatibility should be checked before ordering. Send us your engine speed, pump models, required output speed, and installation details.
