TMP 355 Triple-Output Hydraulic Pump Drive
The TMP 355 is a triple-output hydraulic pump drive for high-capacity hydraulic power distribution from a single engine or electric motor. With a 610 kW reference motor power, 305 kW per output and ratio options from 0.818:1 to 1.22:1, it is suited to demanding machinery requiring three hydraulic pump circuits from one drive source.
Technical Product Data
At a glance
Outputs
3 outputs
Motor Power
610 kW
Power/Output
305 kW per output
Ratio Range
0.818:1 to 1.22:1
Oil Quantity
QB
Triple-output pump drive for high-capacity hydraulic systems
The TMP 355 is a triple-output hydraulic pump drive designed to operate three hydraulic pump circuits from a single mechanical input. It provides a compact transmission layout for machinery where several hydraulic functions need to be powered from one engine or electric motor.
With a 610 kW reference motor power and 305 kW per output, the TMP 355 sits above the lower-capacity triple-output TMP models and is suited to applications where higher power transmission capacity is required.
The unit uses a cast iron housing, case-hardened shaft, ball bearings, Viton seals and ground gears. The standard setup includes same rotation on all outputs, output rotation opposite to input rotation, same ratio on all outputs and lubricated hubs.
Key benefits
Three hydraulic pump outputs from one input
The TMP 355 allows three hydraulic pumps to be driven from a single engine or electric motor, helping simplify driveline layout where multiple hydraulic circuits are required.
Higher-capacity triple-output TMP pump drive
With a 610 kW reference motor power and 305 kW per output, the TMP 355 provides higher capacity than the TMP 350 while retaining a compact triple-output pump drive configuration.
Ratio options for hydraulic pump speed matching
The TMP 355 is available with ratio options of 0.818:1, 1.000:1 and 1.22:1, giving engineers defined options for matching input and output speeds.
Datasheet-backed technical selection
The TMP 355 datasheet includes torque, RPM, oil quantity reference, output pad information, weight and dimensional drawings. This helps engineers check suitability before ordering.
Standard equipment
- Cast iron housing
- Case-hardened shaft
- Ball bearings
- Viton seals
- Rotation equal each output
- Output rotation opposite the direction of input rotation
- Ground gears
- Same ratio on all outputs
- Lubricated hubs
Technical overview
| Specification | TMP 355 |
|---|---|
| Configuration | Triple-output pump drive |
| Reference motor power | 610 kW |
| Power per output | 305 kW per output |
| Maximum input RPM at 1:1 ratio | 2500 rpm |
| Ratio options | 0.818:1, 1.000:1, 1.22:1 |
| Maximum input torque range | 2690–3660 Nm |
| Maximum output torque pad range | 1440–1650 Nm |
| Maximum input RPM range | 2500–2650 rpm |
| Maximum output RPM range | 2170–2870 rpm |
| Oil quantity | QB |
| Weight | 185 kg |
| Output pads shown | SAE B, SAE C, SAE D, SAE E |
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Need to confirm whether the TMP 355 is the correct triple-output drive?
The TMP 355 is a high-capacity triple-output unit, so ratio selection, torque demand, pump arrangement and installation space should be checked carefully before ordering.
Send us your engine speed, pump models, required output speeds, torque requirements and available installation space. We can help confirm whether the TMP 355 is the correct pump drive for your application.
