TMP 350 Triple-Output Hydraulic Pump Drive
The TMP 350 is a higher-capacity triple-output hydraulic pump drive designed for applications requiring three hydraulic pump outputs from one input. It is rated around a 530 kW motor reference, with 265 kW per output, and ratio options from 0.655:1 to 1.525:1. It includes lubricated hubs as part of its standard setup.
Technical Product Data
At a glance
Outputs
3 outputs
Motor Power
530 kW
Power/Output
265 kW per output
Ratio Range
0.655:1 to 1.525:1
Oil Quantity
5.2-6 L
Higher capacity triple-output pump drive for demanding hydraulic systems
The TMP 350 is designed for demanding hydraulic applications where three pump circuits need to be driven from one engine or electric motor, but where the power requirement exceeds the TMP 340 and TMP 341 class.
Its triple-output layout makes it suitable for high-demand mobile machinery, marine hydraulic systems, industrial power packs, and agricultural equipment with multiple hydraulic functions. The TMP 350 allows power to be distributed across three outputs while keeping the drive arrangement contained within a single heavy-duty pump drive unit.
The TMP 350 uses a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, ground gears, and lubricated hubs. The outputs rotate in the same direction as each other, while output rotation is opposite to the input rotation. The same ratio applies across all outputs.
Key benefits
Higher-capacity triple-output configuration
With a 530 kW motor reference and 265 kW per output, the TMP 350 is positioned above the TMP 340 and TMP 341 for more demanding triple-output applications.
Three pump circuits from one engine or motor
The TMP 350 helps drive three independent hydraulic circuits from a single input, supporting complex machinery without introducing multiple separate drive systems.
Lubricated hubs as standard
Lubricated hubs are listed as part of the TMP 350 standard setup, supporting durability in higher-demand applications.
Ratio options for speed matching
The TMP 350 datasheet lists ratios from 0.655:1 to 1.525:1, giving engineers options to match pump speed to application requirements.
Standard equipment
- Cast iron housing
- Case hardened shafts
- Ball bearings
- Viton oil seals
- Ground gears
- Same rotation for each output
- Output rotation opposite to input rotation
- Same ratio on all outputs
- Lubricated hubs
Technical overview
| Specification | TMP 350 |
|---|---|
| Configuration | Triple-output pump drive |
| Reference motor power | 530 kW |
| Power per output | 265 kW |
| Maximum input RPM at 1:1 ratio | 2600 rpm |
| Ratio range | 0.655:1 to 1.525:1 |
| Maximum input torque range | 1551-2370 Nm |
| Maximum output torque pad range | 776-1183 Nm |
| Oil quantity range | 5.2-6 L |
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Need to confirm torque, ratio, or installation layout?
The TMP 350 is a higher-capacity triple-output drive, so ratio selection and pump compatibility should be checked carefully before ordering. Send us your engine speed, pump models, required output speeds, and duty cycle so we can help confirm the right configuration.
