TMP 240 Dual-Output Hydraulic Pump Drive
The TMP 240 is a dual-output hydraulic pump drive designed to operate two hydraulic pump circuits from a single engine or electric motor. Built with a cast iron housing, case hardened shafts, ball bearings, Viton oil seals, and ground gears, it provides a compact and reliable transmission solution for demanding hydraulic applications. The TMP 240 is also available on request as a 240 L version with lubricated gears.
Technical Product Data
At a glance
Outputs
2 outputs
Motor Power
395 kW
Power/Output
197 kW per output
Ratio Range
0.493:1 to 1.500:1
Oil Quantity
1.8-3 L
Dual-output pump drive for compact hydraulic power transmission
The TMP 240 is designed for machinery that needs to drive two hydraulic pumps from one mechanical power source. Instead of using separate drives or more complex transmission layouts, the TMP 240 allows power to be split across two pump outputs in a compact, purpose-built housing.
This makes it suitable for mobile machinery, agricultural equipment, marine systems, and industrial hydraulic power units where space, reliability, and correct pump speed are critical.
The unit uses a cast iron housing for rigidity, case hardened shafts for wear resistance, ball bearings for supported rotation, Viton oil seals for leakage control, and ground gears for efficient power transfer. The outputs rotate in the same direction as each other, while output rotation is opposite to the input rotation.
Key benefits
Drive two hydraulic pumps from one input
The TMP 240 allows two pump circuits to be powered from a single engine or motor, helping reduce driveline complexity and simplify machine layout.
Built for demanding hydraulic applications
The cast iron housing, case hardened shafts, ball bearings, and ground gears help support stable operation in applications where vibration, heat, and load variation can quickly expose weaker components.
Multiple ratio options
The TMP 240 is available with a range of ratios from 0.493:1 to 1.500:1, allowing pump speed to be matched more closely to the machine’s hydraulic requirements.
Optional lubricated gear version
For applications requiring a lubricated gear configuration, the TMP 240 L version is available on request.
Standard equipment
- Cast iron housing
- Case hardened shafts
- Ball bearings
- Viton oil seals
- Ground gears
- Same rotation for each output
- Output rotation opposite to input rotation
- Same ratio on all outputs
Technical overview
| Specification | TMP 240 |
|---|---|
| Configuration | Dual-output pump drive |
| Reference motor power | 395 kW |
| Power per output | 197 kW |
| Maximum input RPM at 1:1 ratio | 3200 rpm |
| Ratio range | 0.493:1 to 1.500:1 |
| Maximum input torque range | 1000-1600 Nm |
| Maximum output torque pad range | 390-750 Nm |
| Oil quantity range | 1.8-3 L |
For reliable operation, check the oil level every 500 hours and replace the oil at least once per year.
Need help confirming the correct ratio or pump layout?
Send us your engine speed, pump details, required output configuration, and application duty cycle. We can help check whether the TMP 240 is the correct model before you order.
